free-articles-zone.com

תפריט Free Articles

Free Articles Authors

Publishers Zone

מאמרים
Free Articles


Free Articles DB search

Setting The Record Straight For Cold Air Intakes vs. Short Air Intakes


Category: Automotive  >>  Trucks

By Tim Saunier   [ 22/08/2007 ]
 | [ viewed 68 times ] Article word count: 404  

Publishing Free Articles Zone articles is subject to our Publisher's Terms Of Service

 Add to Favorites
 Email to a friend
 Publish this Article
 Print this article
 Article direct link
 email Article Author
 Report this article
                                                                                         

Let me start by saying that cold air intakes and short ram intakes both have their pros and cons. That being said, they are also very similar. The Short Air Intake System, AKA as a Ram Air Intake or Cold Air Induction, is a system that will utilize some type of external scoop that faces forward on the vehicle. Normally, it works with a pair of snorkels or a single hood scoop through which fresh air enters. Now the Ram Intake does exactly what it sounds like. As you start driving, fresh air is “rammed” through your hood, forced down the intake manifold, and filtered through the air cleaner. Once you hit thirty five mph, this intake system will act similarly to a turbo charger; taking in more and more air to increase your horsepower. Oh yea, and they are much cheaper.

Let’s look at Cold Air Intakes. The Cold Air System replaces your stock air cleaner box and its plumbing with a simple tube that relocates the air intake to a position where it is picking up cold air from outside the engine compartment. This system consists of a large tube that allows greater airflow capability than the stock filter system. I’ve noticed that people have expressed concerns about water penetrating their engines with this system. First, it is HIGHLY unlikely that this will ever be a problem. Rain and water droplets are no problem. The only case that could be a potential threat is if you drove into an extremely deep puddle, submerging the intake head. The car would have to be in the water so that the intake was submerged, and then it would start sucking up water, making your engine hydro-lock.

In both cases the intake is collecting air from outside your engine compartment. The purpose of the intake is to collect a colder air charge than inside the engine compartment, allowing the fuel management system to give the engine a denser air/fuel charge into the combustion chamber. To clarify: Cold Air = More Horsepower. The warm air from your engine compartment is good for fuel economy, but because is has less oxygen molecules than a cold air charge, the fuel will be leaned out. This increases your fuel efficiency, but decreases your horsepower. To conclude, you should look at your car and figure out what system will work with your car’s ground clearance and hood type.

About the author:
Now that you are an educated shopper, you can look through all the cool colors and designs to pick out your intake. Injen intakes are very popular, but I’m currently using an AFE intake. Can you hear that? Sounds like the record has been set straight. - Tim Saunier


Article Source: http://www.Free-Articles-Zone.com


Article tags: Afe intake, injen intakes, cold air intakes, short ram intakes
 

     Recent articles about Trucks

     Most popular articles about Trucks

     More articles by Tim Saunier

Recent article RSS  |  Business | Finance | Computers and Technology | Arts and Entertainment | Internet and Online Businesses | Health and Fitness | Self improvement | Sports and Recreation | Education and Reference | Fashion | Automotive | Legal | Home and Family | Travel | Food and Drink | News and Society | Shopping and Product Reviews | Communications | Insurance | Real Estate | Home Improvement | Pets | Cancer |
© 2008 All Rights Reserved. Free Articles | online marketing
Israel Travel | Israel Spa