Following Measures Can Save Your Skin While Welding

                                                                                         

Sometimes you may not wearing welding jacket which may cause injury to your skin. To get away from injury, it would be better if you wear a welding jacket. To protect yourself while welding it is important that you wear protective apparels. The primary sources of injuries are: Electric Shock, Fumes, Gases, Arc Rays, Fire, Explosion, Hot parts, Flying metal, Noise and others. While welding, ultraviolet rays and infrared rays can burn your skin or harm your eyes. Sparks and spatter can burn your skin, your hair and your clothes.
In the past, welding operators used heavy, fixed-shape traditional passive
helmet. Bu the trend has changed now, auto darkening helmets are worn by many operators. This type of helmet offers wide range of darkening shades, sensitivity controls, reaction speeds etc. Modern auto-darkening helmets allow you to adjust the settings based on your personal preferences and light sensitivities. Features like grind mode, multi arc sensors and delay control ensure that you are protected before, during and after welding.
Auto darkening helmets have a UV blocking lens that can protect your skin and eyes from the effects of UV rays. One more important thing to notice is that the weight of the auto darkening helmet is half the weight of the traditional
fixed-shade passive helmet. It’s important to note that all premium quality auto-darkening helmets rate their helmets to provide a darkening speed of at least 1/6000 second down to 32 degrees F.
Always wear ear plugs, welding cap and bandana, head protector to protect your skin from welding. For all welding safety apparel, avoid using synthetic materials, as they will melt when struck by spatter and can cause burns. Some of the flame resistant fibers like denim and leather can provide protection and comfort. While selecting a welding jacket choose one that matches your work environment and application. If you’re welding in a non air conditioned garage in South Florida, you may feel hot in a full leather jacket. In such a situation it would be better if you wear a lightweight, flame-resistant cloth jacket or a natural fiber t-shirt and welding sleeves which are flame-resistant. If the work place isn’t much hot and you’re working for several hours everyday, then it would be better if you wear half-leather, half fabric jacket, which will provide good flame resistant and long product life.
Your hands are close to the body. To protect them from spatter you have to wear gloves. Since TIG welding requires dexterity, wear TIG gloves that are thinner and made out of softer, more sensitive leather. MIG and Stick welding produce lot of heat, sparks and spatter and do not require a high degree of dexterity, so use gloves that are made up of thicker, stiffer leather.
If you want to protect your leg, choose apparel that has a combination of both safety and comfort. Finally, choose leather footwear that covers your entire foot. High-top leather shoes and work boots, provides best protection against sparks and spatter.

About the author:
Brayan Peter is an expert author for Welding Equipments, Gas Welding. He written many articles like Spot Welders, Pipe Welders, TIG Welder, MIG Welder, Plasma Cutting Machines, Diesel Generators. For more information visit our site http://www.everlastgenerators.com. Contact him at weldings.info@gmail.com

Article Source: http://www.Free-Articles-Zone.com