Teak Table Refining Tips

                                                                                         

Assuming it's an older teak table, use teak oil for the refining system. Start off with a 0000 steel wool on the top of the table which are a bit lighter than others and sanitize it thoroughly. Particularly pay attention to the grey areas on the table because they are the parts that will need the most refining as they've been all dried up.

Afterwards make sure to sanitize the top half of the table and apply teak oil generously. Do this a large number of cycles in a row over the course of an hour or so until the wood absorbs all the oil. Finally you can wipe off the residual oil from this system.

Now for the leaf portion of the table. Use steel wool with teak oil and rub the area over a multitude of times- again bring to mind to wipe off any excessive oil once the leaf portion has absorbed it properly. This approach will help refine the oil buildup as well as make the leaf side seem brighter. After a few times of repeating this procedure over the next weeks, months, and years, it will even out more and more. This takes trial and error and patience to get it just right.

About the author:

Teak tables combined with a greater amount of vital teak data are available at http://www.teaktips.com/teak-tables/. We're always open!


Article Source: http://www.Free-Articles-Zone.com