How To Clean Marble Tile

                                                                                         

More and more people are using marble tiles for home applications, but since marbles are considered soft stone, you need to take good care of it to maintain its spark and shine. It can be damaged by dirt and some acidic materials such as fruit juice, colas, wines, coffees and so on, but it doesn't made people to unused these materials for their homes. How To clean marble tiles and keep your marble sparkling?

To keep your marble sparkling, be sure to keep it free from routine dust and dirt. Cleaning marble tiles by sweeping the floor often with a soft bristled broom or vacuuming to pick up any loose dirt. If this can't be done every day, settle for two or three times a week.

Since there are plenty of people using marble tiles, the demand of products in cleaning it is increasing. It is best to keep a marble tile cleaner at hand so in case of accidental spillage of acidic materials or dirt, you can easily clean up right away. There are cases that your family and friends will walk around your home with dirt or sand in their shoes, so your marble tiles can gain dirt and scratches, so you have to clean them.

Occasionally wash marble surfaces with lukewarm water and wipe dry with a clean cloth. Wiping surface with a damp chamois will not leave streaks. Once or twice a year, depending on soil, wash with a mild detergent solution (hand dish-washing detergent and warm water), rinse and wipe dry.

A light coat of wax will protect the surface of marble but is not considered essential. Use colorless wax. Don't wax white marble as it may tend to yellow it. A marble sealer can be applied to clean marble, which will protect from staining and allow soil to be wiped off with a damp cloth.

Oil stains may include butter, hand cream or lotion. As soon as possible, spread surface with an absorbent fine powder such as whiting or even corn starch. After short time brush to remove and reapply more powder. Let stand 24 hours. To remove: Scrub with hot, sudsy (detergent) solution and stiff brush. Or wipe with ammonia-dampened cloth. In either case, then rinse and wipe dry. If these alkaline solutions don't remove all the oil, you can try a solvent. Make a poultice dampened with acetone or amyl acetate (available at drug stores), or with home dry cleaning fluid. Use good ventilation with windows open to remove fumes, do not use near spark or flame, and do not leave on too long.

Vinegar is helpful in cleaning lots of materials at home but not marble tiles. Vinegar can damage these types of tiles, so you have to put vinegar away from it. Do not use any type of detergents or soaps, it would be better to use warm water if you do not have cleaner.

One can install marble tiles over the existing floor provided that it is level, smooth and cleaned properly, if not, you have to remove the existing floor. Marble tiles should be cut properly to fit before you glue it to the floor. If you think you can't make this work done, you can hire a professional to do the work for you.

Seal and polish the tiles every few months is a good idea. The polish will help your floor to shine, while the sealant will protect the floors from everyday dirt and grime and make it easier for you to clean marble tiles on a regular basis. Your local home improvement emporium is sure to have plenty of options for marble tile cleaners, sealants and polishing agents.

About the author: