free-articles-zone.com

תפריט Free Articles

Free Articles Authors

Publishers Zone

מאמרים
Free Articles


Free Articles DB search

Softening Your Walls with Color Wash


Category: Home Improvement  >>  Interior Design

By Hanit Piplani   [ 18/03/2008 ]
 | [ viewed 124 times ] Article word count: 364  

Publishing Free Articles Zone articles is subject to our Publisher's Terms Of Service

 Add to Favorites
 Email to a friend
 Publish this Article
 Print this article
 Article direct link
 email Article Author
 Report this article
                                                                                         

If you like the soft look of watercolors, why not try using a color wash on your walls? In addition to a softer color, color washing can accentuate the texture of your plaster or stucco walls. And it�s so simple that even I, a faux-finish-impaired decorator, can do it

There are two techniques for color wash application: sponge or brush. Each requires a slightly different glaze formula.

Sponge Technique:

Color Wash Glaze: Mix together 1 part latex paint and 6 parts water in a bucket.

1. Mask off (using painter�s tape) parts of the room which will not receive the wash. Its best to cover the floor with plastic drop cloths (especially if you are as messy as I am).

2. Prime the wall with a low luster latex paint and allow it to dry completely before the next step.

3. Dip the sponge into the color wash glaze and squeeze lightly.

4. Beginning in a lower corner, apply the glaze to the wall in short, overlapping strokes. Change the direction of the strokes frequently. Work on a small portion of the wall at a time (3 foot by 3 foot is a good size).

5. Repeat moving upward until the entire wall is covered.

6. Allow to dry completely.


Brush Technique:

Brush Color Wash Glaze: 1 part flat latex paint, 1 part latex paint conditioner (available at your local home improvement center), and 2 parts water. Mix in a bucket.

1. Mask off (using painter�s tape) parts of the room which will not receive the wash. Its best to cover the floor with plastic drop cloths.

2. Prime the wall with low luster latex enamel paint and allow it to dry completely before the next step.

3. Allow the paint to dry.

4. Dip a paintbrush in the glaze and remove the excess against the side of the bucket.

5. Apply the paint in a crises-cross pattern.

6. Brush over the surface repeatedly to soften the look of the paint.

7. Wipe excess glaze away, if necessary. (Better get the industrial-sized package of paper towels!)


There you have it! A soft paint look perfect for your newly decorated room�And since you have the technique down to a science, why not come and do my family room? Powder room? Closet?

About the author:
For More Free Resources visit www.thedesignbuild.com

Article Source:
http://www.Free-Articles-Zone.com


Article tags: Interior Designing, Home Decoration, interior decorating, home decorating
 

     Recent articles about Interior Design

     Most popular articles about Interior Design

     More articles by Hanit Piplani

Recent article RSS  |  Business | Finance | Computers and Technology | Arts and Entertainment | Internet and Online Businesses | Health and Fitness | Self improvement | Sports and Recreation | Education and Reference | Fashion | Automotive | Legal | Home and Family | Travel | Food and Drink | News and Society | Shopping and Product Reviews | Communications | Insurance | Real Estate | Home Improvement | Pets | Cancer |
© 2008 All Rights Reserved. Free Articles | online marketing
Israel Travel | Israel Spa