Making model rockets is an inexpensive and fun hobby that has two very different components. You get to make rockets, which is a great hands on craft, and you also get to launch them which makes for a great outdoor event for family and friends. Here is an overview of what it is all about and how to do it.
You don’t need a whole lot of materials to start out in this hobby. There are many all-complete kits available that give you everything you need. This includes the parts to make a rocket, the launching pad, and the engines that power the rocket. You just have to spend the time to assemble the components and supply some basic tools and materials like glue and a small saw or hobby knife.
How does a model rocket work?
The typical path for this type of hobby is you first make a rocket out of a cardboard tube and add fins (either balsa wood or plastic) then attach a parachute and nosecone. Into this rocket tube you install a thing called an engine. It is what creates the propulsion for launch and it is a cylindrical object about the size and shape of a roll of pennies and it contains an ignitable dry propellant. You insert this engine into the bottom of the rocket and when it is fired it propels the rocket into sky. After a certain period of time (usually 4-6 seconds) the propulsion stops and a secondary charge goes off the other end of the engine. This causes the nose cone to blow off the rocket and the parachute to deploy –which safely carries your rocket back to the ground so you can use it again. The engine however, is spent and to launch the rocket again you would install another engine. These engines cost from 2 to 3 dollars each.
How do you fire off the rocket?
You fire off the rocket engine by installing a small metal igniter in it then connecting it to a battery source, which is inside something called a launch controller. This igniter is very similar to the filament inside a light bulb in that when you apply an electrical charge to it it will heat up and glow causing a small fire. This small fire ignites the engine and launches your rocket. When you purchase engines the igniters come with them and the launch controller comes with the launch pad.
I recommend, if you are just starting out in the hobby, you purchase an all-inclusive kit that has everything you need. You first assemble the launching pad, which has only a few parts and is easy to assemble. The parts all snap together and this launching pad is what you will launch the rocket off. It comes with a guide bar that your rocket will travel up and a metal plate that the rocket sits on. This plate keeps the rocket safe by deflecting the exhaust from the engine.
Next you will assemble your rocket and, depending on the kit, there will be variations in this procedure. Traditional rockets will have a cardboard tube body and balsa wood fins. You cut these fins out and glue them to the body tube. You then assemble the cardboard tube engine mount. This is a specially designed tube for holding the engine and it is the most challenging part of the process. A few more steps include building the parachute and nosecone assembly. When you have completed all of this you are ready to paint and apply stickers to your rocket. This whole process, depending on your hobby skills, will take between one and two hours. Some of the newer rocket kits do away with a lot of the balsa wood and replace it with plastic engine mounts and fins. This makes the assembly process much easier and all you need to complete it is some plastic cement. This type of rocket will take you less than an hour to assemble.
Once your rocket is completed you will be ready to launch it and to do this you should find a large open field that is free of any brown or dry grass (for fire safety). You install the igniter into your engine then put the engine into the rocket and place it on the launching pad. As a final step you hook up your launch controller and after standing back and doing a countdown you press a button to launch your rocket.
Making and launching model rockets is not hard and it is not expensive to start out. There are plenty of complete kits that have everything you need that typically cost less than thirty dollars. There are half a dozen companies that make excellent rockets and outstanding complete kits. The two companies I recommend for you as a beginner in the hobby would be Estes and Quest. They both have kits aimed directly at beginners. There are several variations of kits and when selecting a kit you should make sure it has a launch pad, a rocket, engines, and protective wadding (sheets of fireproof tissue). If your kit doesn’t have all these things make sure you order some to go with it.
Some kit suggestions
Estes makes a great beginner kit called the Tandem-X launch set. It comes with two rockets and the launch pad but doesn’t come with engines or wadding so you have to order them separately. Quest has several kits that have everything including the engines and wadding and two of these kits are the Astra III Quick Kit StarterHAZ and the Vertigo RTF HAZ. When you order kits with engines or engines separately you have to allow a longer delivery time. Engines, because they have a fire creating material in them, cannot be shipped by air. They can only be shipped by ground.
Safety
Model Rocketry is a very safe hobby and there is no risk of injury as long as you follow the standard rules of safety as laid out by the National Association of Rocketry. They have a nice safety code that you should read and understand before you embark on your new hobby.
Taking your hobby to new creative heights
One of the best things about model rocketry is the fact that you can take it to new heights of creativity in many different ways. You can design your own rockets, make bigger rockets that climb to even higher heights. You can even design and build multi-stage rockets or gliders. There are also many additional kits and options like an onboard altimeter that will display how high your rocket went and onboard cameras and video cameras that will take snapshots of the ground or even take a video from right on the rocket.
Model Rocketry is an inexpensive hobby that you can get into quickly and have a lot of fun doing. But it is also a hobby that has the potential to go in many different fun and creative directions. It is a pursuit that can give you a lot of fun and satisfaction for many years to come. Have some fun and take your hobby to new heights.
